Hammer Strength HD Athletic NX Half Rack

The 2X3 Xmember should be used in facilities that plan to use camera-based training systems. Compatible with HD Athletic Ball Grips (HDT-BG3).

Maximise space with the offset bar. With two 1.25” textured pull-up bars, this option provides both high and low pulling points with a 9” separation to compensate for lower training uprights.

A Hammer Strength classic, the 2-handle pull-up bar features 1.25” handles in mixed configurations. This pull-up option features grips on each handle and embodies one of Hammer Strength’s true design philosophies: supreme ergonomics.

The most traditional of all pull-up bars. The Monkey Bar has high versatility and is the lowest cost option. The bar is 1.25” in diameter and uses a high-wear, textures paint to enhance grip and extend the finish life.

Looking for custom branding opportunities on your rack? Look no further. Our Custom Signs can be made using laser cuts, vinyl stickers, or a combination of the two.

Make your Rack stand out with a Hammer Strength sign. The backer plate is the same colour as the uprights and the front plate is high-wear charcoal for colour contrast.

The Super Duty Xmember adds structural rigidity to your Rack and serves as a mount for custom signs.

Add any 72” Storage Members from HD Athletic to connect your HD Athletic NX Racks. Available options include: 2 Pipe for bumper plate and ball storage; Accessory Tray for kettle bells and soft accessories; Dumbell Tray; Stability ball storage

Hanging Bar Storage holds the barbell by its sleeve and is finished matte charcoal powder coat. This solution can be mounted on any Xmember.

A convenient, low-profile bar storage solution. Inside the sleeve of each Low Bar Storage is a plastic guard to protect your bar when dropping it into the storage cylinder. The cylinder is angled slightly away from the Rack to ensure the bar can not contact the rack and damage paint.

Monkey and Square Rack Connectors attach HD Athletic NX Racks together for more strength training versatility.

Compatible with all HD Athletic products, the 20” Nordic Ham can be used for exercises like single leg squats and Nordic hamstring curls. The add-on features a chrome pin and paint guards that protect the finish of the upright.

The Power Pivot provides a rotating mount for a variety of push, pull and rotational barbell exercises.

The original HD Athletic Band Pegs work perfectly NX Racks as an anchor to mount resistance bands or for band storage.

Premium Half Rack Bar Catches are 22” (56 cm) long and feature a three-sided urethane guard that protects both the catch and the barbell. Two shock absorption pads and vertical displacement brackets prevent damage to the rack. The Premium Catch attaches with a pin through the side of the rack for added strength and stability. The finish is durable high-wear charcoal powder coating with a chrome pin. ASTM rated to 495 lbs.

Reinforced-nylon Flexible Bar Catches prevent knurling damage to your barbell from drops. They also reduce the noise and bounce of the bar when dropped. Catches are easy to remove from the uprights without tools. ASTM rated to 675 lbs.

The Premium Bar Support is a welded 1/2” plate protected by an oversized, injection-moulded urethane cover for bar protection. The landing area is a 2” resting zone that tapers to 1.5” for wider hand clearance. The finish is a durable high-wear charcoal powder coating with a chrome pin. The interior is wrapped with 1/8” urethane paint guards to prevent any metal-on-metal contact with the rack.

The standard Bar Support is a welded 3/8” plate protected by an injection-moulded urethane cover for bar protection. The charcoal finish is a durable matte powder coating that included paint guard tape to help protect the training uprights. The profile of the landing and resting zone are ASTM and EN compliant.