Hammer Strength Select Bicep Curl
HS-BC
The Hammer Strength Select Biceps Curl is a fundamental part of the strength training progression. Arm pads are angled for stability and unwanted shoulder movement. Pivots and handgrips are positioned to reduce wrist strain and enhance alignment. The 22 pieces in the Hammer Strength Select line provide an inviting introduction to Hammer Strength equipment.
| Specifications | |
|---|---|
| Product Code | HS-BC |
| Dimensions (L x W x H) | 45" x 41" x 55" (115 cm x 105 cm x 140 cm) |
| Machine Weight | 450 lbs (204 kg) |
| Recommended Live Area | 53" x 65" x 55" (135 cm x 165 cm x 140 cm) |
| Weight Stack | 200 lbs (95 kg) |
| Max User Weight | 300 lbs (136 kg) |
| Cables | 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications |
| Instructional Placards | Easy-to-follow instructions illustrate proper use and muscles trained; Axis of rotation marked with red indicator to help cue correct alignment |
| Belts and Pulleys | 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings |
| Cushioning | Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability |
| Cushioning | Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability |
| Shrouds | Standard rear shroud on SE models; Optional full front shroud on SE models |
| Weight Plates And Guide Rods | Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings; 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss; Drop down incremental weight system (standard on SE models) |
| Adjustments | Roller mechanism on seat adjustment provides smooth operation |
| Foot Platforms | Polyethylene spray-coated for impact, corrosion, and abrasion resistance |
| Frame Description | Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity |
| Hand Grips | Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant |
Speak with our consultants
Here guide you through the limitless possibilities
Hammer Strength Select Bicep Curl